13.5.6. Removal and installation of a forward wing

1 — the Wing
2 — the Bolt *, 7 Nanometers
3 — the Bolt *, 10 Nanometers
4 — the Bolt *, 10 Nanometers
5 — the Bolt *, 10 Nanometers

6 — the Bolt *, 10 Nanometers
7 — the Arm
8 — the Bolt *, 10 Nanometers
*) after each otvorachivaniye replace

Installation

 PERFORMANCE ORDER

  1. Disconnect a negative cable (-) of the rechargeable battery.

Observe indications of the Section Replacement of the Rechargeable Battery.

  1. Remove a bumper, address the Section Removal and installation of a front bumper.
  2. Remove a loker of a wing, address the Section Removal and installation of a loker of a forward wing.
  1. Turn out a bolt (1) from a nut (3) and remove the lock (2) from a wing (4).
  1. Turn out screws of fastening of a headlight, address the Section Removal and installation of headlights.
  2. Disunite the socket of the side repeater of turn.
  3. Turn out bolts with (2) on (6) and (8) and remove a wing (1), address an illustration at the beginning of the section.

Installation

 PERFORMANCE ORDER

  1. Installation is carried out in the sequence, the return to removal. At the same time bolts and washers of fastening of a wing need to be replaced with new.
  2. Attach a negative cable (-) of the rechargeable battery.

Observe indications of the Section Replacement of the Rechargeable Battery.