13.5.26. Removal and installation of the lock of a door of a back (Station wagon)
|
|
- Open a door and remove facing, address appropriate section.
|
- Squeeze out a clip (5) and disconnect a cable from the lock.
|
|
- Incline the plug (7) to the right and disconnect a driving bar (1).
|
- Turn out 2 nuts (2) and (4) and remove the lock (3) from a back door.
|
|
Installation
|
|
- Installation is carried out in the sequence, the return to removal. At the same time tighten nuts the moment of 21 Nanometer.
|
|
Back door: Electric motor of the uniform lock
Removal
|
|
- Disconnect a negative cable (-) of the rechargeable battery.
|
|
|
- Open a door of a back and remove facing of a door, address the Section Removal and installation of facing of a door of a back (Station wagon).
|
- Disconnect a driving bar (3) at the hinged plug (4).
|
|
- Disconnect a driving bar (3) at the electric motor (1) (shooter).
|
- Weaken 3 screws of fastening of the electric motor (2) and remove the electric motor.
|
- Disunite the electric motor socket.
|
|
Installation
|
|
- Installation is carried out in the sequence, the return to removal.
- Attach a negative cable (-) of the rechargeable battery.
|
|