- Weaken screws of fastening of a clamp of the lock.
|
- Adjustment of a door in the longitudinal direction: Weaken screws of fastening of loops (arrow A) to a rack A (3) (a back door: a rack (In) so that the door (2) with loops (1) could move in grooves.
|
|
|
|
To some screws of fastening access is available only from within. For this purpose it is necessary to remove at first the lower upholstery on a rack And or Century. On an accompanying illustration the lower loop at the closed door is shown. |
|
- Adjustment of a door in the longitudinal direction: Expose a door according to the set gaps and tighten screws of fastening of loops the moment of 32 Nanometers.
- Adjustment of a door in the cross direction, 1 reception: Weaken screws of fastening of loops (arrow B) so that it was possible to displace a door (2) with loops in grooves. Expose a door so that its contour was aflush with adjacent elements of a body. It belongs first of all to a forward part of a door. In a back part the door is regulated at the expense of a lock clamp. Tighten screws of fastening of loops the moment of 32 Nanometers.
|
- Adjustment of a door in the cross direction, the 2nd reception: In a back part of a door adjustment is carried out at the expense of a clamp of the lock (1).
|
|
|
|
Tags (arrows and / c) are applied to side adjustment, a tag (arrow b/d) for adjustment on height. |
|
- Weaken screws (2) and displace a lock clamp. Adjust a clamp so that the door stood a little outside.
- Carefully close a door so that was aflush with adjacent elements of a body, and the lock clamp correctly came into the lock.
- Tighten screws of fastening of a clamp of the lock the moment of 25 Nanometers.
|