13.5.11. Removal and installation of facing of a forward door

1 — the Terminal nut, 4 pieces.
2 — the Screw, 4 pieces.
3 — the Screw, 2 pieces.
4 — the Decorative level

5 — the Cover
6 — the Screw
7 — Razzhimnaya a nut, 4 pieces.
8 — Facing of a door

Removal

 PERFORMANCE ORDER

  1. Open a door. Take a cover (5) from an armrest and turn out 2 screws (3).
  2. Turn out the screw (6), disconnect a decorative level (4) from facing (8) and remove it forward.
  3. Turn out 4 screws (2). Enter around clips between the panel of a door and facing a plastic wedge and disconnect facing (8).
  1. Disconnect facing of an izrama of a door a little, extend a cable (1) of the drive of a door from a guide (2) and disconnect it.
  1. Disconnect a negative cable (-) of the rechargeable battery.

Observe indications of the Section Replacement of the Rechargeable Battery.

  1. Disunite the socket of the control unit of a window regulator.
  2. Disunite the loudspeaker socket.
  3. Remove facing from a door frame.

Installation

 PERFORMANCE ORDER

  1. Before installation check correctness of provision of tightening nuts (1) and razzhimny nuts (7) on a door frame, address the illustration Facing of a Forward Door.
  1. Installation is carried out in the sequence, the return to removal. At the same time pay attention that the hook shows (3) drafts upward.
  1. Attach a negative cable (-) of the rechargeable battery.

Observe indications of the Section Replacement of the Rechargeable Battery.