13.5.9. Removal and installation of a cable of the drive of a cowl

1 — a cowl drive Cable
2 — the drive Lever
3 — the Bolt

4 — the Lock bracket
5 — the cowl Lock
6 — Holders of clips

Removal

 PERFORMANCE ORDER

  1. Remove a pocket from the driver, address the Section Removal and installation of a pocket from the driver.
  2. Remove a loker of a forward wing, address the Section Removal and installation of a loker of a forward wing.
  3. Pull the lever (2) drives of a cowl. Turn out the screw (3) and disconnect a cable (1) from the lever.
  4. Open a cowl and disconnect a bracket (4) at a support.
  5. Extend a cable (1) from a support at the lock of a cowl (5) and disconnect a sphere at a cable from an eye (arrow A).
  6. Disconnect a cable at holders of a clip (6) and extend via the directing channel in a motive compartment.

Installation

 PERFORMANCE ORDER

  1. Installation is carried out in the sequence, the return to removal.