13.5.15. Removal and installation of a frame of a window of a forward door

Instruction: Removal and installation of a frame of a back door essentially does not differ.
1 — a window Frame
2 — the Window regulator
3 — the Forward door
4 — the Bolt, 32 Nanometers
5 — the Cover

6 — the Bolt, 32 Nanometers
7 — the Bolt, 6 Nanometers
8 — the Bolt, 32 Nanometers
9 — the Bolt, 32 Nanometers
10 — the Bolt, 10 Nanometers

Removal

 PERFORMANCE ORDER

  1. Disconnect a negative cable (-) of the rechargeable battery.

Observe indications of the Section Replacement of the Rechargeable Battery.

  1. Remove a door upholstery, address appropriate section.
  2. Disunite all sockets.
  3. Remove the window regulator electric motor, address the Section Removal and installation of the electric motor of the drive of a window regulator.
  4. Turn out consistently bolts (7), (4), (8), (10), (6) and (9), previously having uncovered (5).
  5. Take out a frame of a window (1) with a window regulator (2) from a door (3) up. An arrow – the fixing screw.

Installation

 PERFORMANCE ORDER

  1. Enter glass on a half into a window frame.
  2. Insert a window frame with a window regulator from above into a door.
  3. Press carving fingers of the electric motor of a window regulator via the internal panel of a door so that they were recorded.
  4. Lay above a door sealant at a window frame.
  5. Screw consistently bolts (6), (9), (4), (8), (10) and (7).
  6. Tighten by hand bolts (6) and (9).
  7. Press from above a window frame inside and tighten bolts (4) and (8) moment of 32 Nanometers. Press on a cover (5).
  8. Tighten bolts (6) and (9) moment of 32 Nanometers.
  9. Tighten a bolt (10) the moment of 10 Nanometers.
  10. Tighten bolts (7) the moment of 6 Nanometers.
  11. Tighten the fixing screw (shooter) the moment of 32 Nanometers.
  12. Install into place the window regulator drive electric motor, address the Section Removal and installation of the electric motor of the drive of a window regulator.
  13. Join the socket.
  14. Establish a door upholstery, address the Section Removal and installation of facing of a forward door.
  15. Attach a negative cable (-) of the rechargeable battery.

Observe indications of the Section Replacement of the Rechargeable Battery.