13.5.5. Removal and installation of a loker of a forward wing

1 — the Forward wing
2 — the Bolt
3 — Loker of a wing

4 — the Nut
5 — Facing of the lower beam
6 — the Bolt


Lifting operation and installations of the car on supports is connected with danger! Therefore before carrying out operation study Poddomkrachivaniye's Section and towage.


  1. Mark on tires with shooters the direction of their rotation. Weaken bolts of fastening of a wheel. Lift and establish a forward part of the car on supports and remove wheels.
  2. Turn out bolts (6) and remove a wheel spoiler.
  3. Turn out bolts (2), disconnect a loker (3) and take out him from a wing down.



  1. Installation is carried out in the sequence, the return to removal.
  2. Fix a wheel, observing the direction of its rotation. Lower the car on wheels and only after that tighten cross-wise bolts of fastening of a wheel the moment of 120 Nanometers.