13.5.24. Removal and installation of facing of a door of a back (Station wagon)

 PERFORMANCE ORDER

  1. Open a door of a back and remove the lighting lamp (1), address the Section Removal and installation of plafonds of internal lighting.
  1. Open a cover in facing (3), release the holder and take out the warning sign.
  1. Turn out 4 screws (2).
  1. Remove by means of an exhaust hook 3370 or HAZET 2520-1 top facing from the holder of a clip on the right and at the left).
  1. Take out carefully 6 spring clips (4) from a door of a back and remove facing (3).

Installation

 PERFORMANCE ORDER

  1. Installation is carried out in the sequence, the return to removal. At the same time you watch that facing was correctly included into a cover at the back door lock.

Facing of a back window

Removal

 PERFORMANCE ORDER

  1. Open a door of a back and remove the lower facing of a door of a back.
  1. Turn out 2 screws (1).
  1. Disconnect 2 spring clips (3) from sides from a back door. (4) – rubber emphasis.
  1. Take out 4 spring clips (3) above from a door and remove facing (2).

Installation

 PERFORMANCE ORDER

  1. You monitor the correct provision of eight rubber emphasis.
  2. Establish facing at first on each side, and then above.
  3. Record facing at first above in back door openings, then on each side.
  4. Fix facing by two screws.