bbe1f4bb

14:30. Removal and installation of the tank of liquid of the windscreen washer / electric motor of the pump

 PERFORMANCE ORDER

  1. Open a cowl and remove the top left cover of the engine (1) if it is established.
  1. Disconnect a negative cable (-) of the rechargeable battery.

Pay attention to the indication of the Section Replacement of the Rechargeable Battery.

  1. Turn out a bolt and a nut (arrows on an accompanying illustration) and take out the top tank of windscreen washer from the lower tank. Take out the water pipeline from the top tank.

Lifting operation and installations of the car on supports is connected with danger! Therefore before carrying out operation study Poddomkrachivaniye's Section and towage.

  1. Weaken bolts of fastening of a wheel. Lift and establish a forward part of the car on supports.
  2. Remove a loker of the left wing, address the Section Removal and installation of a loker of a forward wing.
  1. Turn out bolts with (1) on (3) and reject the lower tank a little back.
  1. Disunite all sockets with (2) on (4) tank.
  1. Press an unblocking and disunite the hose coupling (1) of the electric motor of the pump of windscreen washer.
  2. Disconnect a water hose (5) of the electric motor of the pump of a screen wiper.
  3. If it is necessary, disconnect electric motors of pumps.
  4. Take out the tank of their wheel casing down.

Installation

 PERFORMANCE ORDER

  1. Installation is carried out in the sequence, the return to removal. At the same time the water hose has to be recorded distinctly on the pump. Tighten bolts of fastening of the tank in the sequence (1-2-3) the moment of 7 Nanometers.