3.29. Replacement of an element of the air filter of the engine

 PERFORMANCE ORDER

  1. If there is a cover (A), take out it.
  1. Take out upward the channel of absorption of air (A). For this purpose take out a level (1) if it is available, from the holder of an adsorber of vapors of gasoline.
  1. Turn out 2 screws (2) and take out the forward channel of absorption of air (B).

Engines 1.6, 1.9, 2.5 of l and 2.0 l (ALT)

 PERFORMANCE ORDER

  1. Turn out 2 screws (1).
  1. Take out the top part of the air filter from the holder and take her aside the engine.

FSI engine of 2.0 l of AWA

 PERFORMANCE ORDER

  1. Remove a hose of absorption of air (4) and disunite the socket (3).
  1. Unscrew 2 screws of fastening of the top part of the air filter and take out it upward.

Turbo engine of 1.8 l

 PERFORMANCE ORDER

  1. Release a collar of fastening of a hose (1) and disconnect a wire from the valve of an adsorber of vapors of gasoline.
  1. Disconnect a wire (3) and turn out both screws (2).
  2. Take out the top part of the air filter of the holder and reject towards the engine.

Engine of 3.0 l

 PERFORMANCE ORDER

  1. Remove a hose of absorption of air (4) and disunite the socket (3).
  1. Take out both fuel hoses from the holder on the top part of the air filter.
  1. Disconnect a hose of an admission of secondary air (1).
  1. Turn out screws (2).
  1. Incline the top part of the air filter in the direction of the engine, disconnect below and take out upward.

Engine of 4.2 l

 PERFORMANCE ORDER

  1. Remove a hose of absorption of air (4) and disunite the socket (3).
  1. Disconnect a wire (1) and turn out two screws (2).
  1. Take out two fuel hoses from the holder on the top part of the air filter and take out the top part upward.

All engines

 PERFORMANCE ORDER

  1. Take out a filter element.

Installation

 PERFORMANCE ORDER

  1. Wipe with a rag the case of the air filter, if necessary, blow air.

At blowing off of the filter air you watch that you will measure the mass of air and pipelines of an admission of air were closed by pure rags.

  1. Insert a new filter element into the case of the air filter.
  1. Further operations are carried out in the sequence, the return to removal.
  1. Engine of 3.0 l: Put on a hose of supply of secondary air with a new sealing ring and record.