13.6.20. Removal and installation of a front seat


Removal of a front seat with a side safety cushion requires the AUDI VAS adapter 6036.

  1. Seat with adjustment of height: Lift a seat.
  1. Pull upward a cover (2) over a tip (1) of a belt at a seat and remove.
  1. Press a tip of a belt (1) (arrow) down and disconnect from a seat. Extend a seat belt from a belt guide at a seat.
  1. Shift a front seat (4) forward.
  1. Extend 4 clips (2) and remove back safety covers (1).
  2. Shift a front seat back, extend 2 clips and remove forward covers of guides.
  3. Turn out 2 screws (3) behind and in front.
  4. To exclude operation a head safety cushion, switch off ignition and disconnect at first negative, and then positive cables of the rechargeable battery. Instructions are provided in the Section Replacement of the Rechargeable Battery.
  1. Cast away a front seat (4) back and uncover upward (5) boxes for plugs.

Before undocking of the socket of a side safety cushion remove an electrostatic charge for what quickly concern the lock of a door or a body. The adapter of a safety cushion has to remain attached until the seat is not established again. Surely observe security measures at the address with a safety cushion, address the Section General information and security measures.

  1. Press a pad at the plug and disunite the socket of a side safety cushion (orange color) (6).
  2. Disunite the socket of giving of food (red color) (7), heating of a seat (8) (green color) and a seat belt (black color) (9) if they are available.
  3. Attach the plug side a safety cushion (orange color) (6) to VAS 6036 safety cushion adapter.

The adapter provides additional protection against an electrostatic charge.

  1. If it is possible, attach other end of the adapter of a safety cushion to the plug of giving of food (red color) (7).
  2. Take out a front seat.



  1. Installation is carried out in the sequence, the return to removal. At the same time fix a front seat by the moment of 50 Nanometers.

During connection of the rechargeable battery in salon there should not be people.

  1. Shoot the isolating film from a negative pole of the rechargeable battery, attach at first positive (+), and then a negative cable (-) to the rechargeable battery.

Observe indications of the Section Replacement of the Rechargeable Battery.

  1. If after inclusion of ignition the safety cushion signaling device on the control panel does not die away, it is necessary to consider information from memory of malfunctions on HUNDRED.