|
Do not press in installation time a lock key (6).
|
|
- Enter a seat belt into the belt height regulator.
|
- Displace a buckle with a key (4), without pressing at the same time a key, from top to down on the razblokirovochny lever (1) of the regulator of height and at the same time enter a pin (2) into a groove (3).
|
|
- Fix facing of a rack In above. At the same time lock pads (5) and (7) have to be recorded. You watch the correct gap.
- Press below facing by spring clips (2) and record.
|
|
- Put over facing a door sealant at the left and on the right.
- Check operation of the regulator of height: Press and release a lock key. It has to come back to the top situation independently. Displace the regulator of height and fix it. At the same time the regulator has to be fixed distinctly on each of five positions. Otherwise remove facing and again connect a buckle to a lock key with height regulator.
- Establish a seat belt on a front seat, address the Section Removal and installation of a front seat.
- Fix facing of a rack And yes facing of a rack D/facing over a back door (Station wagon) around a rack In, address appropriate section.
|
|
During connection of the rechargeable battery in salon there should not be people. |
|
- Shoot the insulating film from the negative plug of the rechargeable battery, attach at first positive (+), and then a negative cable (-) to the rechargeable battery.
|
|