13.6.12. Removal and installation of a ware box

 PERFORMANCE ORDER

  1. To exclude operation of a safety cushion of the forward passenger, switch off ignition, then disconnect at first a negative cable (-), and then positive (+) from the rechargeable battery. Stick the negative plug of the battery with an adhesive tape. Observe indications of the Section Replacement of the Rechargeable Battery.
  1. Disconnect by means of a plastic wedge or the screw-driver a cover (2) sideways at the dashboard (7) and turn out 2 screws (5).
  1. Open a ware box and turn out above 3 screws (3).
  1. Turn out 2 screws (4) below.
  1. Take out a ware box (1) down.

Before undocking of cables of system of a safety cushion surely follow instructions on security measures at the address with a safety cushion, address the Section General information and security measures.

  1. Disunite the socket (6) of the lighting lamp of a ware box, and also shutdown of a safety cushion of the forward passenger. For this purpose press a blocking level and disunite the socket.

Installation

 PERFORMANCE ORDER

  1. Installation is carried out in the sequence, the return to removal.

At shutdown of the rechargeable battery in the car there should not be people.

  1. Shoot the insulating film from the negative plug of the rechargeable battery, attach at first a positive cable (+), and then a negative cable (-) to the rechargeable battery.

Observe indications of the Section Replacement of the Rechargeable Battery.