- Merge cooling liquid, address the Section Replacement of Cooling Liquid.
- Remove a front bumper, address the Section Removal and installation of a front bumper.
|
-
Diesel engine of 1.9 l: Remove an air duct before a cooler of nadduvayemy air.
|
|
- Disconnect air ducts at the left and to the right of a radiator (an arrow on an accompanying illustration).
|
|
- Disunite the socket (1) of the relay of pressure of the conditioner.
|
|
- Disunite the socket (2) sensors of external temperature. (3) - bolts of fastening of the condenser.
- Take aside two electric wires.
|
-
Engines 2.0, 3.0 of l (ALT, AWA, ASN): Disconnect a coil of hydraulic liquid of the hydraulic booster (3) and (4). (1) – plug of the sensor of low pressure; (2) – plug of the sensor of external temperature.
|
|
|
|
Do not open a contour of cooling of the conditioner. Danger of accident! |
|
- Disconnect the condenser from a radiator (arrow).
|
|
|
For an exception of damages of the condenser, and also hoses/pipelines of cooling liquid you watch that wires and hoses were not twisted, were not rumpled and were not bent. |
|
- Incline carefully the condenser down and put it.
-
L engines 2.4, 3.0: remove the left top cover of the engine.
|
- Disconnect a hose from a radiator for what remove a lock bracket at a connecting flange (an arrow on an accompanying illustration).
|
|
-
Models with AT: Disconnect below and above from a radiator liquid pipelines for AT and close them.
|
- Disconnect a hose of cooling liquid at the top of a radiator for what release a lock bracket at a connecting flange (an arrow on an accompanying illustration).
|
|
- Release the top clips of a radiator and take out upward.
|
|
- Incline a radiator forward and take out from rubber support assembled with a ring of the fan and the fan.
|