12.5.5. Removal and installation of a protective cover of the steering mechanism

 PERFORMANCE ORDER

  1. Remove a tip of steering draft, turn off a lock-nut, address the Section Removal and installation of a tip of steering draft.
  2. Take out a cover of steering draft.
  1. Open a collar and a hose clip (shooters) of a protective cover.
  1. Remove a protective cover.

If the cover a long time was damaged, then hit in the dirt mechanism can be a consequence of it. Dirt in a combination to lubricant works as emery paste, destroying the steering mechanism. In this case, and also in the presence of rust traces on a gear lath, it is necessary to take a gear lath to repare (work HUNDRED).

Installation

 PERFORMANCE ORDER

  1. At installation of a protective cover you watch that the small diameter of a cover was included into a groove of steering draft and the cover was not twisted.
  2. Apply a new collar and a hose clip.
  3. Establish into place a cover of steering draft.
  4. Establish a tip of steering draft, address the Section Removal and installation of a tip of steering draft.