4.2. Removal and installation of the top cover of the engine / lower protection of a motive compartment / stretcher
|
|
- Turn out bolts and nuts (arrows on an accompanying illustration) uncover (also) the engine.
|
|
- Remove, if necessary, the right top cover of the engine.
|
- Disconnect the electromagnetic valve of an adsorber of the fulfilled gases (1) at an air duct and put it aside.
|
|
- Turn out screws (shooters) and remove an air duct (2).
|
|
Petrol engines 2.4 and 3.0 of l
|
|
- Remove the right cover of the engine (1) in a motive compartment up.
|
|
- Remove a back cover of the engine in the direction of an arrow up.
|
|
- Remove a forward cover of the engine in the direction of an arrow on an accompanying illustration up.
|
|
- If necessary, disconnect and take out a side top cover of a motive compartment.
|
|
Diesel engine of 1.9 l
|
|
- Take out the index of level of oil from the directing pipe.
|
|
- Disconnect covers (arrows on an accompanying illustration) and turn off the nuts lying under them.
|
|
- Uncover the engine to an isnimita then the noise damper lying under it up.
|
|
- Insert the index of level of oil into the directing pipe.
|
|
|
Diesel engine of 2.5 l
|
|
- Take out an engine cover from holders up.
|
|
|
Installation
Installation is carried out in the sequence, the return to removal.
Lower protection of a motive compartment
Removal
The instruction on security measures
Lifting operation and installations of the car on supports is connected with danger! Therefore before carrying out operation study Poddomkrachivaniye's Section and towage.
|
|
- Lift and establish a forward part of the car on supports.
|
- Turn out screws (1). To install the forward panel in situation for carrying out servicing, it is necessary to turn out only three forward screws, address the Section Installation of the Forward Panel in situation for maintenance and an accompanying illustration.
|
|
- Turn out screws (2) and remove a forward cover of the engine from the bottom.
|
- Depending on the engine turn out screws (3) and remove a back cover of the engine from the bottom.
|
|
Installation
|
|
- Installation is carried out in the sequence. the return to removal.
- Lower the car on wheels.
|
|
Stretcher
Bolts of fastening of a stretcher.